4 Care and maintenance
If no dishwasher is available:
▸ Clean the grease filters in hot water and detergent.
▸ Soak the grease filters in hot water and detergent for about two hours, then clean with
a washing-up brush and rinse well with clean water.
Installing
▸ Insert the grease filter
3
into the bracket
4
at the bottom.
▸ Press down the grip
2
and engage the
grease filter
3
in the bracket at the top.
▸ Swing the glass panel
1
down.
▸ In the stand-by mode, hold the
button
depressed until an acoustic signal is
emitted.
–
The flashing button goes out.
1
2
3
4
4.3
Activated charcoal filter display
Activating the activated charcoal filter display
Only activate this function with the recirculation model.
▸ To deactivate the stand-by mode: Hold the
button depressed for three seconds.
▸ Then depress the and buttons at the same time for three seconds.
–
First the button flashes, then the / buttons both flash.
–
The activated charcoal filter display is activated.
Deactivating the activated charcoal filter display
▸ To deactivate the stand-by mode: Depress the
button for three seconds.
–
The appliance is switched off and the LED goes out.
▸ Then hold the and buttons depressed at the same time for three seconds.
–
The / buttons both flash, then the button flashes.
–
The activated charcoal filter display is deactivated when the button stops flashing
and the button keeps on flashing.
11
