![background image](http://html1.mh-extra.com/html/v-zug/adorinalavage-v400/adorinalavage-v400_operating-instructions-manual_3130322113.webp)
113
/ EN
Washing Machine / User Manual
Switching the machine to pause mode:
Press the Start/Pause
button to switch the machine to pause mode. Pause symbol will flash on the display.
Changing the programme selection after programme has started:
The programme change is not allowed when the current programme is running.
You can select the new programme after switching the current programme to pause mode.
C
The selected program starts anew.
Changing the auxiliary function, speed and temperature
Depending on the step the programme has reached, you can cancel or activate the auxiliary functions. See
“Auxiliary function selection”
You can also change the speed and temperature settings. See "Speed selection" and "Temperature selection".
C
The loading door will not open if the water temperature in the machine is high or the water level is above the loading door
baseline.
6.13 Cancelling the programme
The programme is cancelled when the machine is turned off and on again. Press and hold
On/Off
button for 3
seconds. After the countdown as "3-2-1" on the display is over, the machine turns off.
C
If you press On/Off button when the Child Lock is enabled, the programme will not be cancelled. You should cancel the Child
Lock first.
If you want to open the loading door after you have cancelled the programme but it is not possible to open the loading
door since the water level in the machine is above the loading door baseline, then turn the Programme Selection knob to
Pump+Spin programme and drain the water in the machine.
6.14 End of programme
End symbol appears on the display when the programme is completed.
If you do not press any button for 10 minutes, the machine will switch to OFF mode. Display and all indicators
are turned off.
Completed programme steps will be displayed if you press On/Off button.
6.15 Adjusting the VOLUME for warnings, notifications and keys
Low volume and high volume
Press and hold 1st and 2nd auxiliary function buttons for 3 seconds to adjust the volume level. After the
countdown as "3-2-1" on the display is over, the volume level symbol will appear and the new volume level
will be displayed.