2
Initial set-up
The appliance must be installed and connected to the electricity supply in accord-
ance with the separate installation instructions. Have a qualified fitter/electrician
carry out the necessary work.
If the location of the appliance is changed, because of the heat pump it must stand
in its final position for around 2 hours before it can be operated again. Failure to
do this can result in damage to the appliance.
3
Appliance description
3.1
Construction
1
2
3
4
6
7
8
5
1
Door filter with door filter mat
5
Front grille
2
Operating panel (pivoting)
6
Identification plate / Serial number (SN)
3
Cover for door filter
7
Ventilation grille
4
Front filter mat
8
Appliance door
9
