4 Programme overview
4.7
Phases
The drying process has 3 phases:
Phases
Drying:
The laundry is dried as per the settings (programme selec-
tion and user settings).
Cooling down / Final airing
: The laundry is cooled down to a tem-
perature at which the risk of creasing is minimized. The duration of
this phase depends on the temperature of the laundry. «Crease
guard» starts if the appliance is not unloaded when this phase
ends.
Crease guard
: The dried laundry is moved at frequent intervals for
up to 30 minutes to prevent creasing. Open the appliance door to
end before time.
4.8
Duration remaining indicator
When the programme starts, the programme dura-
tion at maximum load is displayed. The actual load
is determined and the expected duration remaining
is calculated, which takes about 1 minute. The letter
«h» flashes and «Determining load» appears in the
display. The expected duration remaining is sub-
sequently displayed.
The programme may possibly take longer than ini-
tially calculated. In this case, the duration remaining
freezes while the programme runs. The letter «h»
flashes again and «Calculating time remaining» ap-
pears in the display.
Extra dry
Calculating time remaining
0 h 59
14
