6 Operation
6.5
Selecting and starting a programme
The following work steps apply to all programmes with the exception of the «Party»
programme.
To start the «Party»
programme, see the «Programme, Party» section (see
Selecting a programme
▸ Touch the dark display.
–
The start screen appears.
▸ On the start screen, touch the button repeatedly until the desired programme ap-
pears.
▸ Touch the desired programme, e.g.
.
–
The programme selected appears in the display.
Intensive
1h15
70°
▸ Touch the
button to add setting options.
–
A selection of setting options appears in the display.
▸ Touch the desired setting option, e.g.
.
▸ Use the programme in permanent mode (see page 34) or save it as a favourite (see
page 35), as required.
Changing programme selection
▸ Touch the
button repeatedly until the start screen appears.
–
The selection made has been discarded.
▸ Make a new selection.
Cancelling programme selection
▸ Touch the
button repeatedly until the start screen appears.
▸ Close the appliance door.
–
The display goes dark.
Starting a programme
▸ When all the necessary settings for the programme have been made, close the appli-
ance door.
–
The programme starts immediately.
–
The FunctionLight illuminates.
If the appliance door is not closed within 30 seconds, all entries, symbols and the
display are cleared; an acoustic signal is also emitted. The programme must be
selected again.
30
Содержание AdoraDish V6000 OptiLift
Страница 4: ...4 15 Notes 60 16 Service Support 63...
Страница 60: ...60 15 Notes...
Страница 61: ...61...
Страница 62: ...62...