Installation instructions
Heat pump dryer
One-family household
1014097-R05
07/11/2017
1014097-R05
2
1. Positioning the installation plate
Use the installation plate to install the appliance. It fixes the appliance in position, and is for use with both free-
standing appliances and appliances positioned in a niche.
Holes must not be drilled in the floor if the room has underfloor heating. The installation plate must be adhered to the
floor.
D
S
E
▸
In the location where the appliance is to be installed, fix the in-
stallation plate with 3 screws. In the case of underfloor heating,
adhere the installation plate to the floor with double-sided ad-
hesive tape
S
.
▸
Dampen the mounting slots
E
on the installation plate with wa-
ter. This makes it easier to push the appliance in.
Free-standing position
If a tumble dryer and a washing machine are positioned side by side, keep a distance of min. 5 mm between the in-
stallation plates and to the walls at the side and min. 45 mm to the back wall. The installation plates for the washing
machine and tumble dryer are the same.
≥5
≥4
5
55
5
595
≥
5
▸
In order to keep the distance to the wall, fold out the spacers
D
on the installation plate.
If an appliance with the V-ZUG-Home option is to be installed:
▸
Connect network cable to the appliance.
Dimensions 45 and 555 only apply if no plumbing fittings are to be
installed behind the appliance.
