Installation instructions
Washing machine «Front loader»
One-family household
J267.370-0
25.6.09 ITH
2
For Service and Spare Part Information please contact:
Manfred Schulz, Technical Manager
V-ZUG AUSTRALIA PTY LTD, c/o C.W. Stirling
6th floor 90 William Street, Melbourne, VIC 3000
[email protected]
Tel/ Fax +61 3 9723 5790, Mob +61 400 088336
1. Remove the screws
C
of the 3 transportation locks
D
.
2. Push the transportation lock
D
up and out.
3. Plug the holes with the rubber stoppers
E
.
A
Raise the appliance slightly at the front and pull it forward, away from the installation plate.
A
Secure the installation plate to the location you wish to install the appliance using 4 screws. On smooth and clean floors, you can
affix the installation plate (double-sided adhesive tape supplied)
A
Dampen the mounting slots on the installation plate with water.
Free-standing position
2. Remove the transportation locks
The transportation locks
D
have to be removed before using the appliance for the first time.
3. Positioning the installation plate
Use the installation plate to install the appliance. This plate fixes the appliance in position (for both free-standing appliances
and appliances placed in a niche).
If a tumble dryer and a washing machine are positioned side by side, keep a distance of min. 5 mm between installation plates
and min. 3 mm to walls.
E
C
1.
2.
3.
D
min. 3
597
595
505
min. 550 *
50
min. 5
min. 5
