V-TUF XR11000, Руководство оператора, Страница: 15 / 18

Remove the used filter bag and close the inlet with the tag as shown below. Dispose of the bag in the
correct manner.
Fit the new filter bag, making sure that the bag’s membrane seal fits perfectly over the internal slot of the
tank inlet and that the bag fits neatly around the edge of the tank internal.
Refit the head ensuring that the clips are completely closed and there is no parts of the dust bag exposed.
Emptying the dirt from the container
ATTENTION The container can only be emptied when the device has been employed for
vacuuming innocuous dusts without the use of a filter bag.
Remove the device’s cover, turn the container upside down and empty it.
The waste materials must always be disposed of in compliance with the current local laws.
Replacing the filtering element
Open the closure hooks, lift the vacuum’s cover from the container and set it down with the filtering
system oriented upwards (use the container as a support surface if necessary).
Unlock the plastic anti-impact basket, by turning it counter clockwise, and extract it; unscrew the
tightening knob; slowly remove the filter, placing it in a bag with an air-tight seal. Dispose of the used
filter in compliance with the current local laws.
Clean the areas covered by the filter and insert a new filter by following the removal procedure above
in the opposite order.
ATTENTION Never use the vacuum without a filter installed.
15