background image

 

OEM TM-50 Quick Start Guide

 

 

D291720.5c

 

Page

 

4

 

of

 

6

 

Rev.

 

3,

 

10/17/17

 

 
Set up 

 

 

Front View 
1.

 

Power/E-Stop & Take-up Controls 

2.

 

Track Shafts 

3.

 

Payout Arm  

4.

 

Cover Tape Arm 

5.

 

Take-up Arm  

6.

 

Sealer Controls 

7.

 

Controller 

8.

 

Sealer Position Adjusters 

1. 

Power On 

Turn the 

Power/Emergency Stop

 

Button

 

(1a) 

on the front of the controller to turn the TM-50 

ON. Ensure the 

Take-up Tension Knob

 

(1b) 

is fully counterclockwise in the OFF position.

 

 

 

 

2. 

Set Track Width 

Insert the provided 

Track Width Gauge

 

(2a)

 

into the track, loosening the two 

Thumb Screws

 

(2b)

 

to adjust track width as needed. 

 

 

 

1a 

1b 

2a 

2b 

Отзывы: