48
Multiple handset use
PTT to a single handset
You have two ways to begin a PTT call:
If you have two handsets, press and hold
PUSH TO TALK
when the handset is not in use.
If you have three or more handsets, press
PUSH TO TALK
when the handset is not in use. Press or
to scroll to the
desired handset and then press
SELECT
or
PUSH TO TALK
to
create the push-to-talk session, or enter a handset number (
1
-
9
for
HANDSETS 1-9
,
and
0
for
HANDSET 10
,
and
1
for
HANDSET 11
,
and
2
for
HANDSET 12
).
Your handset displays
Connecting to HANDSET X...
for a few
seconds. When the connection is made, both the originating and
the destination handsets display
Press and hold [PTT] to talk
and beep once.
Press and hold
PUSH TO TALK
on your handset. A chirp
indicates your microphone is on. Speak towards the handset.
Your voice is broadcast to the destination handset. While you are
speaking, your handset displays
PTT To handset:
X
Release
PUSH TO TALK
after speaking. Both handsets beep
once again. After the handsets beep, you can press and hold
PUSH TO TALK
to continue speaking or the destination handset
can respond (see
Answer a PTT call
on page 50).
Press
OFF
to end the PTT call. The handset displays
Push to talk
Ended
for a few seconds.
-OR-
Place the handset in the telephone base or charger to end the PTT call.
After
PUSH TO TALK
is released, the PTT call remains open for a short time.
If no one presses
PUSH TO TALK
within 10 seconds, the PTT call
ends automatically.
If PTT is turned off in the destination handset, the originating handset displays
Not available at this time
and returns to idle mode.
1.
•
•
2.
3.
4.
•
•
Connecting to
HANDSET X...
Press and hold
[PPT] to talk
Push to talk
Ended
01/02
10:01
AM
PUSH TO TALK
>HANDSET
X
