-21-
Precautions
Specification
•
Please clean the unit with soft cotton cloth, don't use the organic impregnant or chemical
clean agent. If necessary, please use a little pure water or dilute soap water to clean the dust.
•
The unit is weather resistant. However do not spray high pressure water on access control
keypad directly. Excessive moisture may cause problems with the unit.
•
You must use the right adaptor which is supplied by the manufacture or approved by the
manufacture.
•
Pay attention to the high voltage inside the products, please refer service only to a trained
and qualified professional.
APPENDIX
Power supply:
DC 24V
Power consumption:
Standby 0.8W; Working 3W
Camera lens:
Color CMOS, 2.0 Mega pixel
1/2.7’’ fisheye camera,170
0
wide angle
Lock Power supply:
12Vdc, 280mA(Internal Power);
Number of relay circuits:
2(the second lock need external device to support)
Mounting:
Surface
wall-mount / flush mount
Working temperature:
-20ºC ~ +55ºC
Protection: IP54
Material:
Zinc alloy panel(surface mounted)
Stainless steel panel(flush mounted)
Wiring:
2
wires,
non-polarity
Dimension: 176(H)×90(W)×27(D)mm(surface
mounted)
220(H)×119(W)×52(D)mm(flush mounted)
