NOTICE
INSTALLATION
WORKING MODES
1. Pls install this light onto flat surface directionally to get enough solar.
2. The lamp will light up when the environmental brightness is less than 30lux.
3. Inside battery is replaceable, 18650 Li-ion battery, 1200mAh/3.7V.
4. Lamp need to be installed 2-4Mtr from the ground.
1. Pls use the card to measure hole position correctly and drill 2 holes.
2. Fix 2 expansion plugs into the holes.
3. Fix a screw to the lower expansion plug with a spare space, insert the notch onto the screw.
4. Straighten the whole lamp and fasten the upper screw.
5. Press the button to adjust to demanded working mode.
Pls press the Button to adjust working mode:
Press 1st time for Mode A. Press 2nd time for Mode B. Press 3rd time for off.
Mode A:
Automatically turns on to full brightness (220lm) when
motion is detected in the range ≤6 mtrs and then turns to weak
brightness (front light on & back light on) in 10 seconds of no motion.
Mode B:
Automatically turns on to full brightness (2201m) when
motion is detected in the range ≤6 mtrs and then turns to weak
brightness (front light off & back light on) in 10 seconds of no motion.
①
②
③
④
⑤
Hole
Expansion Plug
Screw
Mounting Hole
Button
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: [email protected]
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS.
V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
