1. Remove the protection material from both sides of the
robot
2. Install side brushes
Put the left side brush (L) and right side brush (R) against
the letters L and R on the bottom shell respectively, press
down, you will hear a “click” sound, and it means that the
side brushes are installed in place.
3. After connecting the power adapter to the power supply,
connect it to the charging base and tidy up the redundant
wires.
4. Place the charging base on a flat ground against the wall
and connect to the power supply.
Note: Ensure a space more than 0.5m from the left and right of
the charging base and 1.5m in front of the charging base.
The power line perpendicular to the ground may be dragged by
the main unit, and the charging base may be powered off.
The charging indicator light is normally on when the main unit
is powered on.
12
>1.5m
>0.5m
>0.5m
Installation
