OPERATION OF INDICATOR LIGHT
WIDE APPLICATIONS
This lamp has a red indicator light, which shows the charging state of the lamp.
Widely used for construction site, gate, courtyard, corner, garden, industrial area, warehouse,
garage, parking lot, roof, factory, pathway, farm, pavilion, countryside, pergola, bus station etc.
Working Status of Solar Lamp
Indicator Light Status During the Day Indicator Light Status At Night
Battery power is more than 80%.
Stay on
Off
The battery charges and discharges
normally.
Flash every 3 seconds
Off
Battery power is less than 30%.
Flash every 3 seconds
Flash 3 times, then turn off for 3
seconds. Keep looping.
Useless Buttons
*Press ON, Lamp turns on
*On/Off Switches on the remote control are with memory function.
Press OFF, Lamp flicks 3 times then turns off.
*Press Auto, The Lamp enters AUTO sensor mode directly.
*
Lamp Brightness and Lighting time are not selectable under Auto Sensor mode.
Keep Lighting Time
* These 7 keys(in gray background) are only
used to adjust lighting time and brightness
of Keep Lighting Mode. * Please press the
3H/5H/8H firstly, the lamp will enter Keep
Lighting Mode automatically, then press to
/ / / / /set desired brightness.
For example:
Press + + , lamp works
as below: Lamp lights up at night and keep
45%
brightness for
5Hrs
. After 5Hrs or when
battery power is less than 30%, lamp turns
to Auto Sensor Mode.
60% Brightness
30% Brightness
+15% Brightness by each press (Max
60% Brightness)
-15% Brightness by each press (Min 15%
Brightness)
OPERATIONS OF DIY WORK MODE BY REMOTE CONTROL