TWO OPTIONAL WORKING MODES
MODE A: AUTO SENSOR MODE
MODE B: KEEP LIGHTING MODE
On/Off Button
Please press the button on the lamp first, the lamp will
automatically turn on and enter Auto Sensor Mode, and the
remote control is activated at the same time. Then, please use
remote control to set desired working mode.
Lamp automatically lights up at night and turns
to full brightness when motion is detected in the
range ≤8Mtrs, then turns to lower brightness in
60 seconds of no motion.
Lamp automatically lights up at night and keep
selected brightness for 3H/5H/8H, after which or
when the battery power is less than 30%, lamp
turns to Auto Sensor Mode.
Install Lamp
Install Solar Panel
Connect Wire
Turn ON Lamp, DIY working
mode by remote