V-TAC V-T48160, Инструкция по эксплуатации, Страница: 23 / 37

5.2.5 Indicator Description
HMI Screen: There are 2LEDS on front panel to show the battery working status.
PACK Status Normal/Alarm/Protection
RUN ALM
Remark
Sleep
Power Off OFF OFF All off
Standby
Normal
Alarm
Flash 1
Flash 1
OFF
Flash 3
Standby state
Cell low voltage
Charge
Normal
Alarm
Over Charge protection
Temperature/Over current
Fault/Protection
The maximum power LED
flashes (flashes 2), and the
overcharge alarm ALM
does not flash
ON
ON
ON
OFF
Flash 3
OFF
OFF
ON
If there is no mains power,
LED as standby
Close charge
Discharge
Normal
Alarm
Under Discharge
Protection
Temperature/Over current
Short circuit/Fault/Protection
OFF Flash 3
Flash 3 Flash 3
ON
OFF OFF
OFF ON
Close discharge
Close charge/discharge
Fault
OFF
19