V-TAC B22 A60, Инструкция по установке

Страница: 5 / 145

Step8: Choose ‘Ligh�ng Devices’ to start
pairing the lamp to the app.
Step9: To pair the device with lamp make sure
the light is blinks rapidly.
Once the light blinks rapidly, the lamp is in pairing
mode. If the bulb is not blinking rapidly, you can do
one of the following steps:
A. Switch the bulb on & off repeatedly for 3 �mes,
with short intervals of less than 2 seconds.
B. Tap the ‘How to make light blink rapidly’ link
(as shown on the image to the righ)
Network Modes:
1) EZ Mode: Light flashes twice per second
2) AP mode: Slow flash, once every 2 second
Confirm if the light blinks rapidly, select the WiFi
network, and enter the password.
ENGLISH
4