SYSTEM INFORMATION
Press “ ” and “ ” in the main interface to select “System Information”, and then press
“ENT” to view the parameters which is shown in Figure 24.
The system information include “product model”, “serial No.”, “software version” and
“certificate version”. If select "Software Version" in the "System Version", can view the
inverter Version 1, Version2, MCU Software Version, RS485 protocol and other informa-
tion, as shown in Figure 25.
FAULTS
Press “ ” and “ ” in the main interface to review the fault history, and then press “ENT”
to view the sub-menu which is shown in Figure 26.
There are 8 pieces of fault information in the record which is shown in Figure 26. Otherwise
it will display “No Fault!” Refer to HISTORY for more detailed information.
INVERTER CONTROL
Press “ ” and “ ” in the control interface, and then press “ENT” to view the sub-menu
which is shown in Figure 27.
System Information
Part No
.
Serial No .
Soft Ver
Figure 24 System information
S ys te m Ve r
V er si on 1
: V 1 . 0 5
V er si on 2
: V 1 . 0 5
M CU V er si on
: V 1 . 0 5
F au lt
1 : A 0 05 G ri d un de r fr eq
2 : A 0 01 I np ut u nd er V ol t
3 :
1
C on tr ol M en u
O n /
O ff
C le ar
R es ta rt
F ac to ry
Figure 27 Control interface
Figure 26 Fault information
Figure 25 System version
Refer to the table below for detailed information.
