V-Show S718 Elf, Руководство пользователя

Страница: 14 / 15

Rotation
Gobo
030 - 039
040 - 049
050 - 059
060 - 069
070 - 079
080 - 089
090 - 099
100 - 109
110 - 119
120 - 129
130 - 192
193 - 255
Rotation Gobo4
Rotation Gobo5
Rotation Gobo6
Rotation Gobo7
Static Gobo2shock (from slow to fast)
Static Gobo3shock (from slow to fast)
Static Gobo4shock (from slow to fast)
Static Gobo5shock (from slow to fast)
Static Gobo6shock (from slow to fast)
Static Gobo7shock (from slow to fast)
Forward flow (from fast to slow)
Reverse flow (slow to fast)
11
Gobo
Rotation
000-127
128-191
192-255
gobo angle adjustment
gobo forward rotation
gobo reverse rotation
12 frost 000-127
128-255
no effect
frost cut in
13 Prism 000-127
128-255
Prism pops up
Prism cut
14
Prism
rotation
000-127
128-191
192-255
Prism angle adjustment
Prism rotating forward flow
Prism rotation reverse flow
15 focusing 000-255 gobo clarity from far to near
16 enlarge 000-127
128-255
no effect
zoom in
17
reset
000-127
128-255
None, there is no action for the area
without the specified function
Reset all motors
11. Common malfunctions
1. After the lamp is reset normally, it will not accept the control of the
console

Check whether the digital start address value and function options of the
lamps are correct;

Check whether the connection of the communication control line is correct,
the communication line is too long or has been interrupted;

Check whether the control equipment is invalid, and check whether the
signal amplifier connected in series is invalid;

Check whether the communication line is too long or other devices interfere
with each other;

Optimize wiring, shorten the length of control signal lines, separate
high-voltage and low-voltage lines;