8
Connecting VAMP with the iPhone
As shown in the right diagram, connect the VAMP and iPhone by slowly sliding the VAMP into
place at an angle to the iPhone. First, insert the 30 pin DOC connector at the bottom into the
iPhone connector and then press the top of the iPhone down. When the VAMP and iPhone are
properly connected, the iPhone will beep once or vibrate twice. Furthermore, the LED lamp
toggle switch on the VAMP will light red or green.
*The color of the LED lamp changes between green for VQ mode and red for PURE mode
depending on the VQ (V-MODA eQualizer) function setting. See Settings for more information.
30-pin DOC connector
Toggle switch
