Version 26.04.2021
HW: 16(V65)
VL2-RTI11-5
P
a
g
e
17
3.
Video interface operation
3.1.
By infotainment buttons
To switch the video sources the EXIT button can be used.
A long press of the key switches to the next activated video input. If all inputs are enabled
the order is:
Factory video
video IN1
video IN2
factory video
…
Disabled inputs will be skipped. While switching from
Video IN1
to
Video IN2
the audio-
source will be switched too, assuming the sources have also been connected to the audio
cable.
Switchover by vehicle buttons isn’t possible in all vehicles. In some vehicles the external
keypad or the 6pin cable’s white wire has to be used
(see following chapter).
3.2.
By external keypad
Alternatively, or additionally to the factory infotainment buttons, the interface’s external
keypad can be used to switch the enabled inputs (press 2-3 seconds).
3.3.
By white wire of the 6pin cable
Alternatively, or additionally to the factory infotainment buttons, the 6pin cable’s white wire
can be used to switch the enabled inputs (with +5V or+12V impulse.
