Version 05.04.2018
HW: 25(V92)
CI-VL2-MIB2-E
P
a
g
e
2
Contents
1.
Prior to installation
1.1.
Delivery contents
1.2.
Checking the compatibility of vehicle and accessories
1.3.
Boxes and connectors
1.3.1.
Video-Interface
1.3.2.
CAN-bus box
1.3.3.
Dip-switch settings – interface (black)
1.3.3.1.
Enabling the interface’s video inputs (dip 2-3)
1.3.3.2.
Rear-view camera setting (dip 5)
1.3.3.3.
Monitor specific settings (dip 6, 7+8)
1.3.4.
Dip-switch settings - CAN-box (red)
2.
Installation
2.1.
Place of installation
2.1.1.
Place of Installation – video interface
2.1.2.
Place of Installation – daughter PCB
2.2.
Connection schema
2.3.
Connecting video-interface – Power 7 CAN and CAN-box
2.4.
Connection video-interface – analogue
2.5.
Opening the factory monitor (not Skoda vehicles)
2.6.
Connection of the 50pin ribbon cables
2.6.1.
Warning notes, concerning the installation of ribbon cables
2.7.
Closing the monitor’s rear-side.
2.8.
Assembly - head unit, monitor and daughter PCB
2.9.
Connection – picture signal cable
2.10.
Installation – Skoda vehicles
2.10.1.
Skoda monitor – removal and opening
2.10.2.
Skoda monitor mainboard – disconnection and removal
2.10.3.
Connection of the 50pin ribbon cables – Skoda
2.10.4.
Reassembling – Skoda head unit and monitor
2.11.
Connection – video sources
2.12.
Audio-switch and audio-insertion
2.13.
After-market rear-view camera
2.13.1.
. Case 1: CAN-box receives the reverse gear signal
2.13.2.
. Case 2: CAN-box does not receive the reverse gear signal
2.14.
Picture settings and guide lines
3.
Video interface operation
3.1.
By Voice button
3.2.
By white wire of the 6pin cable
4.
Specifications
5.
FAQ – Trouble Shooting-Interface functions
