Version 05.04.2018
HW: 25(V92)
CI-VL2-MIB2-E
P
a
g
e
15
2.6.1.
Warning notes, concerning the installation of ribbon cables
1) The contacting ends of ribbon cables always have to be installed in a straight and
precise 180° position to the connector. Each deviation from a perfect contact position will
curse faulty contact and even danger of short circuit
2) The ribbon cable’s contacting side always has to correspond to the contacting side of
the connector, concerning the mounting position.
3) Avoid cable contusion or cable injury caused by sharp-edged metal.
2.7.
Closing the monitor’s rear-side.
Before leading the daughter PCB through
the monitor’s rear metal sheet, it’s further
necessary to save both sides of the
ribbon cables to avoid any kind of ribbon
cable breakage, caused by vibrations of
the metal parts. Use a smooth, but thin
issue tape because there will be lack of
space between the head unit’s and
the monitor’s housing.
Fix the monitor’s rear metal sheet by using the 7 screws.
