Version 21.02.2017
CI-VL2-MMI3G-xxx
P
a
g
e
12
Connect female connector of PNP power/CAN cable to the male connector of CAN-
gateway.
Location of CAN-gateway
• A1/A3
below the steering-wheel
• A6/A7/A8
footwell on the passenger side below right (A6 from 2013 middle of
rear bench seat)
• Q5/Q3
footwell on the passenger side top left
Location under the steering-wheel
2.4.3.
RNS850 – Cable with open ends
For installation in VW vehicles with RNS850 use the additional 4-pin power cable with open
ends. The PNP power/CAN cable isn’t needed.
Connect the stripped ends of the 4pin cable to ground, b12V, CAN high and
CAN low of the climate control unit harness without cutting the cables of the vehicle
harness.
The following pin diagram shows pins and cable colours:
There`s no liability for the vehicle`s pin diagram!
Changes in the manufacturer`s production are possible any time. The mentioned
information has to be verified by the installer.
Pin-diagramm
4pin cable
Pin diagram
CAN-gateway
• grey
CAN Low
•
•
Pin 3
orange
/
brown
• blue
CAN High
•
•
Pin 2
orange
/
violett
