Version 21.02.2017
CI-VL2-MMI3G-xxx
P
a
g
e
11
2.4.2.
CI-VL2-MMI3G-GW – Connection to the CAN-gateway
Remove the female CAN-gateway connector of the vehicle harness from the rear of
the CAN-gateway Head-unit and connect it to the male connector of the PNP
power/CAN cable.
Note: In case of difficulties with the connection of the PNP Power harness; the enclosed
stripped 4pin harness can be soldered to the upper shown cables of the gateway. The 4pin
cable diagram is shown below:
Pin diagram
4pin cable
Pin diagram
CAN-gateway
•
CAN Low
brown
•
•
Pin 5
orange
/
grey
•
•
Pin 6
orange
/
bown
(Audi A6 vehicles)
•
CAN High
blue
•
•
Pin 15
orange
/
green
•
•
Pin 22
orange
/
blue
(Audi A6 vehicles)
•
Masse
Pin 10 of the Quadlock!
CAN-gateway
