Version 15.07.2022
HW CAM(V100) / (V11.3)
CI-RL4-MIB3-E
P
a
g
e
13
Mill away enough of the plastic housing at the marked point to allow the flex cables to pass
through without friction between the housing and the intermediate plate later on.
Clip the copper-coloured 60pin factory picture signal cable coming from the monitor to the
enclosed ribbon cable mergerin the shown position.
Clip the enclosed
short
60-pin picture signal cable to the other side of the enclosedribbon
cable merger in the shown position.
Caution: It is impossible to feed the flex cables through at another location without
damaging them!
