V-fit CYCLONE AIR ROWER, Сборка и руководство пользователя

Страница: 13 / 24

EXERCISE MONITOR FUNCTIONS
CALORIES ~ (COMPUTED THEORETICAL CALORIE BURN)
DISTANCE ~ (APPROX. EXERCISE DISTANCE [KM])
SCAN ~ (CHANGES FROM FUNCTION TO FUNCTIONS)
SPEED ~ (APPROX. ROWING SPEED [KM/H])
TIME ~ (COUNT UP [Minutes and Seconds])
MONITOR FUNCTION SPECIFICATIONS MONITOR OPERATING SPECIFICATIONS
CALORIES
DISTANCE
SCAN
SPEED
TIME
USING YOUR EXERCISE MONITOR
To provide ease of use, there is only 1 button on your Exercise Monitor: - MODE
Press the MODE button to manually move through each of the Exercise Monitor's functions in turn. These are in order: - SPEED, DISTANCE, TIME
and CALORIES. If you press the MODE button until you reach the SCAN mode shown as “{ }” and then release it, the display will change
approximately EVERY 6 SECONDS to show each function in turn. Pressing the MODE button while in any function will lock the Exercise Monitor on
that function until the MODE button is pressed again.
DISTANCE - Calculated on the basis of Rowing Speed and Time, is an approximate value and is used purely for reference purposes.
CALORIES - Calculated on the basis of Rowing Speed and Time, is an approximate value and is used purely for reference purposes.
RESET - Press and hold the MODE button for more than 4 Seconds to reset the Exercise Monitor at any time. This will automatically place the
Exercise Monitor in SCAN mode. It is now reset and all functions will appear as zero until you begin your next workout.
AUTO SHUTDOWN - Your Exercise Monitor is designed to automatically Shut Down after approximately 4 Minutes of inactivity.
To fit the necessary BATTERIES - (NOT SUPPLIED) to your Exercise Monitor, simply place the correct size batteries between the exposed contacts in
the battery compartment. Ensure that batteries are fitted with the '+' / '-' ends matching the outline on the sticker in the battery compartment or etched
into the compartment. Failure to fit batteries correctly may result in damage to your Exercise Monitor, which is not covered by our guarantee. To fit
replacement batteries as required, carefully remove the Exercise Monitor from its fitting, disconnect the Sensor Lead and follow the instructions above.
BATTERY INSTALLATION
PLEASE DISPOSE OF OLD BATTERIES CAREFULLY AND CONSIDERATELY
APPLICABLE TO : - CYCLONE AIR ROWER
Monitor Function
0.00 - 999.9 Kcal (THEORETICAL)
KM (COUNT UP)
SHOWS EACH FUNCTION EVERY 6 SECONDS
0.00 – 99.9 KMH
0:00 – 99:59 MINUTES (COUNT UP)
POWER SOURCE
STORAGE TEMPERATURE
OPERATING TEMPERATURE
2 x AA (1.5v) POWER CELLS
-10c - +60c
0c - +50c
Page 1 3