background image

17

17

17

CONTACT INFORMATION 

Garage Gorilla Motorized Storage Unit

V-Bro Products is on call.  Installation and service information as well as ordering 
repair parts is as near as your telephone Monday – Friday 8:00 AM to 5:00 PM 
Eastern Time (subject to holidays).  Contact us toll free. 

V-Bro Products 
28114 County Road 561 
Tavares, Florida 32778 
800-954-6745
fax: 352-742-0702 

MAINTENANCE 

Garage Gorilla Motorized Storage Unit

1. Check to be sure the motor is properly attached to its mounting plate. Make

sure the bolts are tight.

2. Periodically check the condition of the electrical cords, plugs and controls.

SPECIFICATIONS

Garage Gorilla Motorized Storage Unit

Model

----------------- Garage Gorilla 220 

Load Capacity

----- 220 lbs 

Lifting Height

------ 117 inches 

Lifting Speed

------- 33 ft/ Min 

Cable Length

------- 165 Inches 

Cable Diameter ----

 Inch 

Voltage

--------------- 110V / 60 HZ 4.5 Amps 

Motor

----------------- ¾ HP 

1-800-954-6745

Model---------------------------------------------Garage Gorilla 220
Load Capacity----------------------------------------------------220 lbs
Lifting Height-------------------------------------------------117 inches
Lifting Speed---------------------------------------------------33 ft/min
Cable Length--------------------------------------------------165 inches
Cable Diameter-------------------------------------------------1/8 inch
Voltage-----------------------------------------120V / 60 HZ  4.5 Amps
Motor--------------------------------------------------------------3/4 HP

Model---------------------------------------------Garage Gator 220
Load Capacity----------------------------------------------------220 lbs
Lifting Height-------------------------------------------------117 inches
Lifting Speed---------------------------------------------------33 ft/min
Cable Length--------------------------------------------------165 inches
Cable Diameter-------------------------------------------------1/8 inch
Voltage-----------------------------------------120V / 60 HZ  4.5 Amps
Motor--------------------------------------------------------------3/4 HP

CONTACT INFORMATION

 

                           

Garage Gator Motorized Storage Unit          

MAINTENANCE

                 

Garage Gator Motorized Storage Unit          

SPECIFICATIONS 

                   

Garage Gator Motorized Storage Unit 

         

V-Bro Products
28114 County Road 561
Tavares, Florida 32778
888-GATOR-08
fax: 352-742-0702

1-888-GATOR-08

Содержание Garage Gator GGR220




















Отзывы: