Level monitoring system
NT 4600
Technical information / Instruction manual
page
Visualisation - Operation
Page "Basic settings - System"
Setting of date, time, country-specific units, number of displayed silos , measuring interval of Nivobob,
horn, USB data storage
User Level 2
Date - time
Setting of the actual date and time.
Language
Setting of the software language.
Units
Setting of the unit for the silo dimensions in page "Silo settings" (see page 16).
Amount of silos
Definition of the total number of silos for the visualisation.
Measuring interval
Activation of automatic measurement starts of the Nivobobs. The measurement starts happens daily, the first time at the setted
Starttime (time of day), then regularly repeated with the setted Interval (hours : minutes).
If the Interval is set to 0, no measurement starts will happen.
Horn connected
Setting, if a horn (which is activated with a full detection) is connected. This setting is required to adjust the internal data
processing to the horn functionality.
USB data storage
A USB stick can be plugged in at the bottom side of the panel. The data storage starts automatically after the switch is set to
"yes".
Trend data for all silos are stored to the USB stick in .csv format.
The stored level values are volume related (considering the silo cone), in per mil (0 - 1,000 per mil). Storage in absolute values
like tons, cubic meter or meter is not possible.
A new file is created for every month.
The transfer of data to the USB stick is done automatically every 10 minutes.
Interval:
The Interval defines the time until the next measurement value is stored (hours : minutes). Minimum Interval is one minute. With
setting 00:00 no storage will happen.
Storage:
States the required storage space of the USB stick (depending on the selected Interval).
Nivotec
®
1
2
3
4
5
6
7
8
9
10
11
12
NT 4600
gi010417
14
