39
Using the Device
1. Remove the Crown 2 clearomizer from your e-cigarette battery.
2. Turn it so that the drip tip is facing downward. Remove the base of the atomizer head with the airflow control by rotating it
anticlockwise from the glass tank.
3. Remove the old atomizer head by rotating it anticlockwise and replace with a new head by screwing this on in a clockwise
direction. The yellow rubber ring must still sit correctly in order to prevent liquid from leaking out.
4. Now reassemble all the parts and check again that no liquid can leak out. Screw the clearomizer back onto the battery and allow
the atomizer head sufficient time to become saturated with liquid.
Please also follow the operating instructions on page 38.
Changing the Atomizer Head
