37
Using the Device
Prior to first use, drip a few drops of your e-liquid on the atomizer head and let it sit before vaping. Please take several puffs
without activating the atomizer and leave the atomizer head sit for 15 minutes in the e-liquid filled tank before use. Don’t clean
atomizer heads with water. Because atomizer coils are wearing parts, they must be changed regularly.
Turn the airflow control ring on the base a little way to increase or reduce the inflow of air to suit your own preference. The greater the air
inflow, the less the draw resistance will be. Take care to ensure that the air inflow is sufficient, particularly when using sub-ohm atomizers.
The drip tip is inserted onto the clearomizer. You can remove it by gently pulling it off. Clean the drip tip with warm water. Before fitting a
drip tip, ensure that it is completely dry.
While holding the fire button of the device, inhale the vapor slowly and continuously through the mouthpiece of your e-cigarette.
Release the fire button while exhaling the steam.
Notes for Commissioning
Adjusting the Air Inflow
Changing the Drip Tip
Vaping
