4.1
FUNCTION DEFINITION AND SETUP
4.1.1 LCD Segment Check and Backlight Adjustment
Under this function all segments and indicators will be in flashing mode as well as backlight for user
to check if function properly. Backlight brightness also has 5 level selections for optimal viewing.
a.
Scale is off
b.
Press and hold
TARE
and press
ON/OFF
, display shows
F 1
c.
Continue pressing
TARE
until display shows
F2
d.
Press
ZERO
to enter, all LCD segments including backlight starts flashing. The display will change
between full segment check and software version with buzzer sound for functionality check.
Display will also show the software version under this function.
e.
Press
MR
to adjust the backlight brightness. There are five settings, press
ZERO
until the desire
brightness is achieved
f.
When
ZERO
is pressed, display shows
F3
g.
Press
ZERO
to enter the next function, or press
M+
to exit. When
M+
is pressed, display will
show
SAVE
, user can either press
ZERO
for yes to save the changes made or press
CL
for not to
save the changes.
CAUTION: BEFORE LEAVING THE INTERNAL SETTING, ALL CHANGES MUST BE SAVED OTHERWISE
THE SCALE WILL STILL FUNCTION UNDER THE OLD SETTING.
4.1.2 Offset Value & Function Key Test
Under this function scale will show the offset value and be able to check the function of each key.
a.
Scale is off
b.
Press and hold
TARE
and press
ON/OFF
, display shows
F 1
c.
Press
ZERO
to enter, display will show the offset value in the
TOTAL
window. Press any digit key
and display will show
KEYid
and the name of the key you are pressing.
d.
Press
ZERO
to exit the current function, display shows
F2
e.
Press
ZERO
to enter the next function, or press
M+
to exit.
4.1.3 Digital Motion Filtering
Under this function, scale will compensate the environmental vibration or unstable weighing object
and deliver the correct weighing result.
a.
Scale is off
b.
Press and hold
TARE
and press
ON/OFF
, display shows
F1
c.
Continue pressing
TARE
until display shows
F6
d.
Press
ZERO
to enter, and display shows
FiLt0
e.
Press
MR
to select the desire setting, there are two levels in the setting
f.
Press
ZERO
to confirm and exit the current function, display shows
F7
Содержание VOC Series
Страница 1: ......