UWE VOC Series, Руководство по эксплуатации

Страница: 12 / 21

bAud : baud rate ProtL : transmission protocol
trAns : transmission type ForMt : transmission format
4.1.8.1 Transmission Mode
Under this function, user can select the transmission interface, speed, mode and format for RS-232
or RS485, and also the communication protocol.
f. Indicator is off
g. Press and hold TARE and press ON/OFF , display shows F1
h. Continue pressing TARE until display shows F7
Selection under trAnS : StrM / Manu / CMd / Auto
Selection under ForMt : SEr.1 / SEr.2
use
ZERO
key to select,
MODE
key to confirm
i. Press MODE to confirm and exit the current function, display shows F8
j. Press MODE to enter the next function, or press ZERO to exit. When ZERO is pressed, display will
show SAVE , user can either press MODE for yes to save the changes made or press ZERO for not
to save the changes.
Terminology:
trAnS
: transmission mode ForM t: result format
Sample of print data:
StrM : continue sending data when weighing result stables (only support Ser.1 format)
10.05kg
-10.05kg
6.00kg
0.00kg
……………..
MAnU : data is sent once when manually press M+ , and send total value when pressing MC
When format setting is Ser.1, data is sent once when pressing M+ , but does not support print total
10.05kg
-10.05kg
6.00kg
0.00kg
……………