UWE ADM Series, Руководство по эксплуатации, Страница: 4 / 21

1. INSTALLATION
1.1 Check and make sure that the following accessories
are included:
This operation manual
Scale x 1
Plastic platter x 1
Stainless steel cover x 1
Screw x 1
Rubber cap x 1
Power adaptor x 1
Contact your dealer if any items are missed.
1.2 Lock the plastic platter (
FIG 1 A
) to the platter
holder, with the screw ( FIG 1 B ) included and then
apply the rubber cap (
FIG 1 C
).
1.3 Place the stainless steel platter ( FIG 1 D ) onto
the plastic platter.
1.4 Power on the scale
a. Before plugging the power adaptor into
electricity outlet, check and make sure that the
input voltage of power adaptor matches with the
output voltage of the outlet. If not, do not plug
in and contact your dealer immediately.
b. Before first time use, plug the adaptor into the
wall outlet and charge the scale for at least 8
hours.
c. After battery is fully recharged, remove adaptor
from scale. Apply the rubber cap ( FIG 2 E ) to seal
the DC input jack of scale.