36
2. Menus, settings and functions
NOTE:
If the water contacts are turned off
and you fail to turn on the computer
manually, the computer will still
activate by itself within one minute
of having started the dive. The time
and decompression calculation will
be consequently inaccurate, but the
accuracy of the depth measurement
will be unaffected.
2.8.7 Revert to factory settings
This menu allows you to revert all settings in
all menus of the computer back to the original
factory settings. In order to do this, you need
to enter the safety code (
313
). This prevents
unintentionally reverting all settings. To enter
the code, use the
+
and
-
buttons to defi ne
the fi rst digit (
3
), then
press
>>
to confi rm
it. Now defi ne the next digit (
1
), confi rm by
pressing
>>
then defi ne the last digit (
3
).
Upon
pressing SAVE
after having defi ned
the last digit, a set-up routine is initiated. This
allows you to choose the language, units
and time zone after which all settings will be
reverted to the original factory defaults. The
display shows the message
REVERT TO
FACTORY SETTINGS SUCCESSFUL
for
2 seconds.
NOTE:
Reverting to factory settings does
not cancel existing transmitter pairing
information nor does it cancel owner
and emergency information.
2.9 Personalization
(patents pending)
2.9.1 Screen
confi guration
(default: CLASSIC WITH GRID)
In this menu you can set your preferred
display lay-out, as described in Chapter 1.
You can choose between
CLASSIC
,
CLASSIC WITH GRID
,
LIGHT
and
FULL
confi gurations. You can also rotate the
display by 180 degrees, so that the buttons
are at the bottom of the computer.
Содержание Galileo sol
Страница 1: ...English ...
Страница 2: ......
