Uwatec Aladin ONE Скачать руководство пользователя страница 19

Страница: 19 / 24

English

6 SOS mode

III UWATEC

Aladin

ONE

III

Activation: automatic
If the diver remains above a depth of 0.8m (3 feet) for more than three minutes
without observing a prescribed decompression, the computer will automatically
switch into SOS mode after the dive.

While in SOS mode, the computer cannot be used for diving.

The SOS mode will be unlocked after 24 hours.

Diving within 48 hours after the end of an SOS mode will result in shorter no
stop times or longer decompression stops.

The dive will be entered in the logbook with "SOS".

• Serious injury or death may result if a diver does

not seek immediate treatment should any signs
or symptoms of decompression sickness occur
after a dive.

• Do not dive to treat symptoms of decompression sickness!
• Diving in SOS mode is extremely dangerous and you must assume full

responsibility for such behaviour. UWATEC will assume no liability.

A diving accident can be analyzed at any time in the logbook and downloaded
to a PC by means of the infrared interface (IrDA) and SmartTRAK software.

DESAT

WARNING

Time remaining until SOS

mode switches off automati-

cally

Maximum

depth

Dive time

Содержание Aladin ONE

























Результаты поиска

Содержание Aladin ONE

Отзывы:

Похожие инструкции для Aladin ONE

Бренды по названию

Популярные бренды

Uwatec Aladin ONE, Руководство по эксплуатации

Результаты поиска

Содержание Aladin ONE

Отзывы:

Похожие инструкции для Aladin ONE

Бренды по названию

Популярные бренды