Uwatec Aladin H, Руководство пользователя

Страница: 30 / 64

30
ALADIN H USER MANUAL
3.8.3 Preparation for a dive with
MB levels
Setting the MB level
To change the MB level, see chapter:
SETTINGS , section: Setting the MB Level.
F
NOTE: MB levels have an influence on
the dive planner.
3.8.4 Functions during the dive
with MB levels
Level stop information
MB no-stop time
While diving with MB levels L1 to L5 the
Aladin H will display the MB no-stop time
instead of the
ordinary no-stop time. Within the MB no-
stop time no level stops are required.
“NO STOP” and the MB level symbol are
visible. The remaining MB no-stop time is
shown in minutes.
MB L1.L5
indicator
MB no-stop
time
F
NOTE:
• Information and alarms for MB
no-stop time and ordinary no-stop
time are the same.
• No-stop time relative to L0 is shown
by pressing the right button 5x.
• Regardless of the MB level, it is
generally recommended that you
perform a slow ascent during the last
few meters/feet.
Level stop
Level stop
icon
Level stop
duration
Total Ascent Time
(including level
stop)
Deepest level
stop depth
On entering the level stop phase, “NO
STOP” disappears and the STOP arrow
appears. The STOP arrow flashes for 8
seconds and an audible attention beep
sounds. To complete the dive without
cascading to a lower MB level, all requested
level stops must be observed.
The deepest level stop is displayed in
meters/feet. The display “2: 3m” means
that a level stop of 2 minutes at a depth
of 3m/10ft has to be observed. Deco
information relative to L0 is shown on an
alternate display (see chapter:
Diving with
your Aladin H , section: Decompression
information).
When a level stop has been completed,
the next higher level stop – if present – is
displayed. When all level stops have been
observed, the STOP arrow disappears and
“NO STOP” reappears. The indication of
time shows the MB no-stop time again.
Level stop ignored