Uwatec Aladin A1, Руководство пользователя

Страница: 60 / 64

60
A1 USER MANUAL
6.6 Compliance
6.6.1 EU Radio directive
Hereby, Uwatec AG, declares that the radio
equipment type PAN1740 is in compliance
with Directive 2014/53/EU. The full text of
the EU declaration of conformity is available
from the official SCUBAPRO importers in
EU.
6.6.2 Diving
A1 dive instrument is also compliant with
the European standard EN 13319: 2000
(EN 13319: 2000 – Depth gauges and
combined depth and time measuring
devices – Functional and safety
requirements, test methods).
6.6.3 FCC & ISED regulatory
notices
6.6.3.1 Modification Statement
Uwatec has not approved any changes or
modifications to this device by the user. Any
changes or modifications could void the
user’s authority to operate the equipment.
6.6.3.2 Interference Statement
This device complies with Part 15 of the
FCC Rules and Industry Canada license-
exempt RSS standard(s). Operation is
subject to the following two conditions: (1)
this device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause
undesired operation of the device.
6.6.3.3 Wireless Notice
This device complies with FCC/ISED
radiation exposure limits set forth for an
uncontrolled environment and meets
the FCC radio frequency (RF) Exposure
Guidelines and RSS‐102 of the ISED
radio frequency (RF) Exposure rules. This
transmitter must not be co-located or
operated in conjunction with any other
antenna or transmitter.
The A1 contains TX FCC ID: T7V1740
6.6.3.4 FCC Class B Digital Device
Notice
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there
is no guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can
be determined by turning the equipment
off and on, the user is encouraged to try to
correct the interference by one or more of
the following measures:
1. Reorient or relocate the receiving
antenna.
2. Increase the separation between the
equipment and receiver.
3. Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
4. Consult the dealer or an experienced
radio/TV technician for help.
6.6.3.5 CAN ICES-3 (B) / NMB-3 (B)
This Class B digital apparatus complies
with Canadian ICES-003.