Uwatec Aladin A1, Руководство пользователя

Страница: 18 / 64

18
A1 USER MANUAL
2.2.1 Stopwatch
From the Sport menu press SEL/ESC to
enter the Stopwatch submenu.
The stopwatch will start measuring the time
by pressing the +/UP button.
To pause the time on the stopwatch press
the +/UP button once again. To reset the
time to 0 press-and-hold the +/UP button
while the stopwatch display shows the
status STOPPED.
In addition to time, laps can be marked
by pressing the -/DOWN button while the
stopwatch is running. By doing so the lower
part of the screen will show the number of
the lap while the lap time will be displayed
in the upper part of the screen. While the
stopwatch is stopped you can review your
lap times from the memory by repeatedly
pressing the -/DOWN button.
By pressing-and-holding the SEL/ESC
button you can exit the stopwatch and
return to the
Sport menu.
F
NOTE: You can leave the stopwatch
actively counting or you can leave
the stopped time on the display.
The status will be stored in memory,
allowing you to continue from the
same display at a future time.
2.2.2 Swim mode
Swim mode combines a stopwatch with
a stroke and distance counter. For proper
counter operation the user’s pending values
can be adjusted. These are described in
chapter
3.1.2 Swim settings .
When the swim mode is activated, the
duration of your swim will be shown on
the second screen. The distance will be
displayed on the third screen and the
last screen will show the number of swim
strokes. The water temperature is shown
in the bottom left of the display. Switch
between displays by pressing the +/UP or
-/DOWN buttons. A press of the SEL/ESC
returns you to the
Sport menu.