UW
Technics
#11075 Optoelectronic TTL-Converter (for SONY)
for NAUTICAM underwater photo housings
USER’S MANUAL
Specifications
!
Compatible photo cameras:
Sony A7 II, A7R II, A7S II, A7 R III, A7 III, A7R IV, A9
!
Compatible underwater housings : NA-A7 II, NA-A7R III, NA-A7R IV, NA-A9
!
Compatible strobes: Inon Z330, Z240, S2000,
Sea&Sea YS-250, YS-D1,
Sea&Sea YS-D2 (made-in-China)
Ikelite DS-161, DS-160,
Subtronic Pro-270, Pro-160.
!
TTL outputs onboard: 2 optical, 1 electric
!
(+/-) “Flash Exposure compensation” adjustment underwater: yes
!
Continuous (serial) shooting mode support: yes
!
1-st / 2-nd curtain modes support: yes
!
Switching TTL /M underwater by camera controls: yes
!
Setting strobe power manually by camera controls in M mode: 1/64
…
..1/1
!
Switching power “ON/OFF”: automatic by camera command
!
Battery type: CR2032 (2pcs.)
!
Current consumption (in standby mode) 0.01 mkA
!
Battery capacity (+20
°
C): 1-3 years, 65 000 flashes
!
Compatible Fiber-optic cable type: Nauticam #26216, #26217
!
Available Electric Bulkhead type (optional accessory): Nikonos-5, Ikelite, S-6
!
Dual Electric cables (“Sea&Sea”, “Ikelite”) support: yes
Safety Warning for Batteries usage
"
Use batteries only CR2032 type.
"
Batteries must be new and undamaged. Carefully check batteries before usage.
"
To avoid leakage or explosion, always check appropriate battery terminals position (“plus” / “minus”) before installing to the
TTL-Converter.
"
Never expose batteries to overheating, short-circuiting, disassembling, high pressure, mechanical deformation. Save
batteries from high humidity and water. All these circumstances may cause a chemical leakage, electric shock, explosion or
fire, which can be dangerous for health.
"
Remove batteries from TTL-Converter before longtime storage.
"
Utilize used batteries according appropriate rules.
"
Keep out batteries of children. Save batteries in inaccessible for children place
