
7
41-1320 REV A
41-1311-01/41-1313
REPLACING THE UV-C LAMP
1. Unplug the V-PAC™ SC unit’s power cord from the electrical outlet.
2. Using index fingers, squeeze the locking tabs (figure 6) inwards
towards the center of the grill. Lift the grill up and remove.
4. Insert the new UV-C lamp in place and install by rotating one-quarter turn (top-to-front).
5. Replace the top grill removed in previous step 2 by pressing it into position until it locks. The aluminum
reflector must be positioned over the UV-C lamp, nearest the front of the unit (figure 7a).
6. Reset the UV-C lamp timer by lightly pressing the related RESET button on the Service Panel (located
directly beside the “UV Lamp” LED indicator) with a paper clip or stiff wire. The “UV Lamp” LED service
light will turn green, and the 6 month timer will reset. This completes UV-C lamp replacement procedures.
Figure 6
Figure 7
Figure 7a
Maintenance
MERCURY
NOTICE
WARNING
!
THIS DEVICE CONTAINS MERCURY IN THE SEALED ULTRAVIOLET
BULB. DO NOT PLACE YOUR USED BULB(S) IN THE TRASH.
DISPOSE OF PROPERLY
ULTRAVIOLET-C LIGHT IS EMITTED FROM THE BULB WHEN THE
UNIT IS ELECTRIFIED, SEVERE EYE INJURY OR IRRITATION COULD
RESULT, UNPLUG THE UNIT WHEN SERVICING THE BULB TO AVOID
EXPOSURE OF EYES AND SKIN TO THE ULTRAVIOLET-C LIGHT.
MISAPPLYING OR MISUSING THE UV-C BULB COULD CAUSE
INJURY TO THE EYES OR SKIN. NEVER USE THE BULB WITHOUT
INSTALLING IT IN THE UNIT AS INSTRUCTED. NEVER OPERATE THE
UNIT WITHOUT THE TOP GRILL IN PLACE. THIS PRODUCT CAN BE
SERVICED OR MAINTAINED ONLY BY CHANGING THE UV-C BULB.
THE BULB CONTAINS NO SERVICEABLE PARTS.
3. Rotate the UV-C lamp one-quarter turn, top to rear, (figure 7) and remove lamp.
Содержание V-PAC SC
Страница 1: ...Owner Operation Maintenance Manual 41 1311 01 41 1313 V PAC SC 115 volt 220 volt...
Страница 12: ......