9
Care and Maintenance
Please lubricate the threads at the tail cap of the flashlight at
various intervals. This will preserve and maintain thread integrity
when unscrewing the tail cap section.
Please lubricate the O-rings located at the tail cap thread at
various intervals. This will prolong the life of the O-rings as well as
maintain their function to prevent the ingress of dust and moisture.
If the batteries are drained excessively, the protected PCB circuit
may activate to prevent damage to the 18650 battery due to over
discharging. If this is the case the battery will auto shut off and will
require charging. In this event charging may require longer than
normal. This is to preserve the battery chemistry. On subsequent
charges the charging time will resume to normal.
Battery Safety
NOTE: Battery damage due to misusage will not be covered under
warranty, likewise damage to the V3 365nm MINI caused by 18650
batteries other than the supplied batteries will also not be covered
by warranty, except for the recommended batteries which are:
18650 lithium-ion button top ICR, INR, or IMR which are at least 43g in
weight (indicating the correct chemistry density).
Do not place damaged 18650 batteries in the V3 365nm MINI
Do not store batteries in pockets or close to metal objects when
kept outside of the V3 365nm MINI
Do not tamper with the batteries
If the batteries fail to charge after a number of successive attempts,
this indicates that the PTC mechanisms have activated to make the
battery safe and will be deactivated permanently. This is a built in
safety precaution. Do not try to activate batteries which have been
deactivated
