while holding
A
to zero the color channel marked by the
indicator.
3.Change the color channel by pressing
B
with the head
up. Zero each channel as described above.
4.Place the measuring aperture on the sample and press
the head down. The density of the sample as measured
in the selected color channel will be displayed. The
other color component values of that color may be
displayed by pressing
B
after raising the head.
AUTO
DENS
098
A
B
AUTO
DENS
000
A
B
MAN
DENS
098
A
B
Yellow target measured in MANUAL mode
Instrument Setup
Density Slope Controls
- Use these controls to restore
calibration or force the instrument into agreement with
another standard.
7