UTStarcom UT-300R2U, Руководство пользователя, Страница: 43 / 71

Chapter 4 Other Configuration 39
4.8 ROUTING CONFIGURATION
Use Static Routing to specify a route used for data traffic within your Ethernet LAN or to route data on the WAN.
This specifies that all packets destined for a particular network or subnet use a predetermined gateway.
To add a static route to a specific destination IP on the local network, click the Routing button on the left-side of
the main window.
IP Route Table window
To add a static route to a specific destination IP on the local network, enter a Destination IP address, select a
suitable Netmask , and type in the NextHop . Click Apply to enter the new static route in the table below. The route
becomes active immediately upon creation.