UTS 1450/850, Инструкция по эксплуатации

Страница: 9 / 20

Page 9 UTS SALES & REPAIRS LTD
Assembly Procedure
UTS recommends that a minimum of two people is required for the assembly of the UTS LADDER
850/1450 tower. Only climb the tower from the inside using the ladder section.
Platform Heights in Meters Frame at Base Frame at top
1.2, 3.2, 5.2, 7.2, 9.2, 11.2 4 Rung 4 Rung
1.7, 3.7, 5.7, 7.7, 9.7, 11.7 2 Rung 3 Rung
2.2, 4.2, 6.2, 8.2, 10.2, 12.2 2 Rung 4 Rung
2.7, 4.7, 6.7, 8.7, 10.7 3 Rung 4 Rung
PLEASE TAKE NOTE
Never place the platform on the guardrail frame
Always climb from the inside of the frame – never the
outside. When working on the platform never overreach
The end frames should provide a firm hand hold.
Insert adjustable leg assembly (with castors or
base plates) into the base of ladder frame, repeat
this with the span frame.
Lock all castor wheels
1.
Attach one horizontal brace to the bottom rung of the
span frame, claws facing downwards.
This frame will now be self - supporting.
2.
Position the ladder frame as shown. Connect the
other end of the horizontal brace to the ladder
frame. Now connect the frames using a second
horizontal brace on the opposite side, attach from
the inside of the frame just above the bottom
rung, claws facing outwards, this will square the
tower.
Check tower is vertical (Using spirit level)
3.