UTS 1450/850, Инструкция по эксплуатации

Страница: 7 / 20

Page 7 UTS SALES & REPAIRS LTD
LOCKING CASTORS
Castor wheels should be pointed outwards
at approximately 45 degrees and locks en-
gaged as shown opposite.
FITTING STABILISERS
Attach a stabiliser to each corner of the
tower at approximately 45 degrees for max-
imum stability (refer to relevant illustrations)
and attach the clamps where indicated.
On the S2 stabiliser use the telescopic leg
for adjustment on uneven ground.
Make sure that all stabilisers are firmly in
contact with the ground when using the
structure.
CORRECT FITTING OF
HORIZONTAL BRACING
THE CORRECT FITTING OF
HORIZONTAL BRACING IS IMPORTANT.
The diagrams opposite illustrate the
CORRECT brace positions.
REMEMBER: Always fit braces
DOWNWARD or from the inside facing
OUTWARD –
BUT NEVER INWARD
FITTING ADJUSTABLE LEGS
Take the adjustable leg assembly complete
with its castors, make sure that all the
adjusting nuts are positioned down at the
castor and slide them into the vertical tube,
turn the base unit the right way up and with
the aid of a spirit level placed on the
platform, the adjusting nuts can be used to
level the structure. (and not to gain
additional height).
BRACE CLAMP LOCKING
Ensure that the brace clamp is locked as
shown.
Always make sure the brace is not clamped
too close to the weld as indicated by the
arrow on the drawing on the right.
Un - Locked Locked