background image

UTS SALES & REPAIRS LTD

 

www.towersandpodiums.co.uk

 

[email protected]

 

 

UTS 

LADDER

 

1450/850

 

Instruction Manual

 

Mobile Access Tower

 

3T 

-

 Through the trap method

 

Instruction Manual

 

This Assembly Guide is intended to provide you 
with step

-

by

-

step instructions on how to erect your 

Mobile Access Tower (MAT) with ease and safety, 
using the 3T (through the trap) method.

 

You should read and understand all notes and 
diagrams, including the parts list for each height, 
before commencing assembly. Personnel should 
be qualified or competent to erect this tower. 
Please consult the PASMA

s code of practice for 

full information on the use of Mobile Access 
Towers.

 

Remember to do a risk assessment of the area 
where the tower is to be used before commencing 
erection.

 

This instruction manual shall be available on the 
location of use of the mobile access and working 
tower.

 

This mobile access and working tower shall only be 
used according to this manual without any 
modification.

 

Mobile access and working towers must only be 
used in accordance with national regulations.

 

KM 617169

 

UTS SALES & REPAIRS LTD

 

Manufactured to: BSEN1004

-

1:2020 CLASS 3 8/12 XXXD 

 

Instruction Manual EN 1004

-

2 en x cz x es x fr x pl

 

Содержание 1450/850





















Отзывы: