11
position.
E.g.:
2.2. Admin phone number setting
After admin number is setup, all SMS operations to the device are under this phone number only.
Command:
admin123456 phone number
(Note: this phone number is your own mobile phone number, not
the SIM card number inside the GPS tracker)
Reply
：
admin ok
E.g.
：
admin123456 13265790180
When the GPS tracker is in over-speed alarm, vibration sensor alarm, or low battery alarm, it will send alert
to the admin number. (13265790180)
Delete admin number:
Command
：
noadmin123456
Reply
：
noadmin ok
2.3 Setup speed alarm
Command:
speed123456 070
(suppose speed is 70Km/h)
Reply:
speed ok
When the device goes over 70Km/h, it will send a
“
speed alarm! SMS to the admin phone number.
To deactivate speed alarm:
Command:
nospeed123456
Reply:
speed ok
2.4. Setup GPS location uploading interval
The default setting for the GPS location uploading interval is 1 minute. If you want to change it to 3 minutes
(180 seconds), you can send SMS command:
Command
：
upload123456 180
Message Reply
：
upload ok
2.5. Vibration alarm setting
