3
Unit Display
Operating Instructions
1.
Filter
button: The
Filter
light illuminates after 250 hours of operation as a reminder that the filter needs to be
cleaned. To reset this function after cleaning the filter, press the
Filter
button.
2.
Cont.
button: Press to activate the continuous dehumidifying mode.
3.
Fan
button: Press to select the Normal or Turbo fan speed.
4.
Power
button: Press to turn the unit ON and OFF.
5.
Timer
button: Press to program auto-ON and auto-OFF times.
6.
Up
and
Down
(+ and -) buttons: Press to raise and lower the set humidity level within the range of 35 to 85
percent relative humidity (RH) in 5 percent increments, or use to adjust the timer settings.
7. LED display: Displays the set humidity level or timer settings while settings are being adjusted. Displays the
ambient humidity level from 30 to 90 percent RH with an accuracy of ±5 percent.
8.
Filter
light: Indicates that the filter needs to be cleaned.
9.
Full
light: Indicates that the water tank is full, removed from the unit or incorrectly positioned.
10.
Cont.
light: Indicates that the continuous dehumidifying mode is active.
11.
ON
and
OFF
lights: Indicate that the timer-ON and timer-OFF settings are active.
12.
Turbo
and
Normal
lights: Indicate the fan speed.
13.
Auto defrost
light: Indicates that the unit is defrosting.
Programming the Timer
1. To set the auto-OFF time, press the
Timer
button until the
Off
light illuminates.
2. Use the
Up
and
Down
buttons to adjust the timer setting in half-hour increments up to 10 hours and hour
increments up to 24 hours.
3. To set the auto-ON time, press the
Timer
button until the
On
light illuminates.
4. Use the
Up
and
Down
buttons to adjust the timer setting.
5. Wait five seconds for the unit to accept the setting.
Continuous Mode
Press the
Cont.
button to constantly run the dehumidifier. The humidity level cannot be manually set when the unit is
operating in continuous mode.
Filter
Cont.
Fan
Timer
Filter
Full
Cont.
On Off
Turbo
Normal
Auto defrost
1
7
8
12
9
10
13
2
3
4
5
6
11
