Utimaco CryptoServer LAN V4, Руководство по эксплуатации

Страница: 25 / 42

Maintenance
Page 25 of 42
4 Maintenance
The maintenance tasks that a customer is permitted to perform on the CryptoServer LAN are
to check the power level of the batteries (carrier battery and external battery) and if necessary
to change the external battery in the battery compartment, as well as to remove/swap a
power supply.
When the external battery reaches a critically low power level (see Chapter 4.1), it must be
replaced (see Chapter 4.2).
Apart from this, no maintenance tasks should be carried out on the CryptoServer LAN.
If you should open CryptoServer LAN for any other maintenance work, all liability claims
against Utimaco become null and void.
4.1 Checking the Battery Status
The CryptoServer LAN displays LOW when the external battery in the battery compartment or
the carrier battery of the CryptoServer CSe/Se-Series Gen2 reaches a critical power level.
To find out which of the batteries of the CryptoServer LAN has reached this critical power level
by using the menu control of the CryptoServer LAN, follow these steps:
1. Click OK.
2. Click the

button to select the CryptoServer Administration menu item.
3. Click OK to confirm.
4. Click OK to select the Show CryptoServer Info menu item.
5. Use the

button to go to the Battery State menu item.
6. Click OK to confirm.